Raspberry Pi Robot Car – GoPiGo
The GoPiGo robot as Starter Kit from Dexter Industries contains everything you need to build a...
Read Moreby Maker | Apr 18, 2020 | Robot cars, Top Story | 0 |
The GoPiGo robot as Starter Kit from Dexter Industries contains everything you need to build a...
Read Moreby Maker | Apr 18, 2020 | Electronic, Top Story | 0 |
The classic electronic speed controller (ESC) can be found in RC cars, boats and model planes. I...
Read Moreby Maker | Mar 21, 2020 | Electronic | 0 |
Why I want to control a servo motor with the Raspberry Pi is explained below. I want to install an...
Read Moreby Maker | Feb 9, 2020 | Electronic, Top Story | 0 |
With one of my robots, more precisely with the GoPiGo model from Exter Industries, I bought a...
Read Moreby Maker | Feb 8, 2020 | Jetson Nano, Robot cars, Top Story | 0 |
Now that the Jetson Nano is configured to boot from the SD card or SSD hard drive, it is time to...
Read Moreby Maker | Feb 8, 2020 | Jetson Nano, Top Story | 1 |
For my donkey cars with the Jetson Nano but also for other projects I always like to use the cheap...
Read Moreby Maker | Jan 28, 2020 | Electronic, Top Story | 0 |
In my search for an alternative to the classical ultrasonic sensors I came across the low cost...
Read Moreby Maker | Jan 24, 2020 | Electronic, Top Story | 0 |
A L298N motor driver or dual H-Bridge / H-Bridge is used to control the direction and speed of...
Read Moreby Maker | Dec 15, 2017 | Robot cars, Top Story | 1 |
I decided to use a Raspberry Pi Computer to control the SainSmart desktop robotic arm. The robotic...
Read Moreby Maker | Dec 15, 2017 | Robot cars, Top Story | 3 |
Finally I got the 6-axis robotic arm from SainSmart. The model is designed for an Arduino micro...
Read Moreby Maker | Jun 10, 2017 | Electronic, Top Story | 0 |
I had the idea to build a face with two eyes for one of my Raspberry Pi robots. The best and...
Read Moreby Maker | Feb 2, 2017 | Electronic, Top Story | 0 |
With an XBee module different network topologies could be setup. I only use a direct connection...
Read More
Recent Comments