ESP32 Dev Kit C V4 – Build Your Own Robot Car – Project Kickoff
Welcome to the first episode of an exciting series of articles that will guide you step-by-step...
Read More
Tag: Video
ESP32-CAM building your own robot car with live video streaming – connect external WIFI antenna
The small guide is intended to help with many pictures and tips on how to activate the external...
Read More
ESP32-CAM building your own robot car with live video streaming – robo car example programs
In the previous articles, the ESP32-CAM was discussed in detail. You learned how to connect it to...
Read More
ESP32-CAM building your own robot car with live video streaming – programming the WIFI remote control
With the previous article and the first small control of the motors, the robot car has already...
Read More
ESP32-CAM building your own robot car with live video streaming – Set up development environment
In this article I describe how to set up the Arduino development environment to program the...
Read More
ESP32-CAM building your own robot car with live video streaming – project start
This article is the first in a series of articles that describe step by step how to build a small...
Read More
ESP32-CAM building your own robot car with live video streaming – Cabling in general
In the ESP32-CAM robot car two small 6V gear motors are installed. These yellow motors are very...
Read More
ESP32-CAM building your own robot car with live video streaming – Design of the chassis
The chassis can be built from many materials or packaging that would otherwise end up in the...
Read More
ESP32-CAM building your own robot car with live video streaming – Wiring the I²C hub
To control the L298N motor driver with the ESP32-CAM module we need the PCA9685 servo controller....
Read More
ESP32-CAM building your own robot car with live video streaming – Using the I2C Bus
Now that the live video image of the camera is transmitted over the network, this article is about...
Read More
ESP32-CAM building your own robot car with live video streaming – USB-serial adapter wiring
To program the ESP32-CAM module, it must first be connected to the PC. As it does not have a USB...
Read More
ESP32-CAM building your own robot car with live video streaming – Installing the live video streaming software
In the previous article you connected the ESP32-CAM module to the USB-Serial Adapter and connected...
Read More
Book recommendation:
Build your own robot car with the Raspberry Pi!
Recent Comments