ESP32-CAM building your own robot car with live video streaming – connect external WIFI antenna
The small guide is intended to help with many pictures and tips on how to activate the external...
Read MoreThe small guide is intended to help with many pictures and tips on how to activate the external...
Read MoreIn the previous articles, the ESP32-CAM was discussed in detail. You learned how to connect it to...
Read MoreWith the previous article and the first small control of the motors, the robot car has already...
Read MoreIn this article I describe how to set up the Arduino development environment to program the...
Read MoreThis article is the first in a series of articles that describe step by step how to build a small...
Read MoreIn the ESP32-CAM robot car two small 6V gear motors are installed. These yellow motors are very...
Read MoreThe chassis can be built from many materials or packaging that would otherwise end up in the...
Read Moreby Maker | May 8, 2020 | Jetson Nano, Top Story | 0 |
This post has been replaced by the following contribution: Autonomously driving Nvidia Jetson Nano...
Read Moreby Maker | Feb 29, 2020 | Electronic, Top Story | 0 |
My big BigRob robot is built so that it can operate for many hours outdoors. Equipped with a...
Read Moreby Maker | Feb 8, 2020 | Jetson Nano, Top Story | 0 |
The selection of camera models that can be connected to the CSI connector of the Jetson Nano is...
Read Moreby Maker | Feb 19, 2017 | Electronic, Robot cars, Top Story | 1 |
The Raspberry Pi camera was mounted without a case on my robot car. But the robot is designed to...
Read More
Recent Comments