RTK Archives - Roboter planen bauen programmieren

Big Rob – Raspberry Pi robot with differential GPS

by Maker | Feb 26, 2017 | Robot cars, Top Story | 0 |

The Big Rob is not yet finished. I have to work on the look of the robot. But the electronic...

by Maker | Feb 2, 2017 | Electronic, Top Story | 0 |

With an XBee module different network topologies could be setup. I only use a direct connection...

by Maker | Feb 1, 2017 | Electronic, Top Story | 0 |

The previous post described how to setup the base unit and how the base unit transmit the GPS...

by Maker | Jan 3, 2017 | Electronic, Top Story | 2 |

In the previous article described how to install the software for the RasPiGNSS module. After...

by Maker | Dec 28, 2016 | Electronic, Top Story | 0 |

This chapter explains which software needs to be installed on your Raspbian installation to get...

For the setup of my differential GPS solution with two RasPiGNSS “Aldebaran” modules I...

by Maker | Dec 25, 2016 | Electronic, Top Story | 1 |

With this post I will explain how a theoretical setup of a precise GNSS positioning architecture...

by Maker | Dec 23, 2016 | Electronic, Top Story | 5 |

A few years ago I started building robot cars which could drive in my living room or outdoors....